Even the best product life has a close relationship with the processing and installation and daily maintenance. 

If the Composite Quartz Stone Countertops is made of quartz stone, we need to pay attention to the following aspects during the installation process.

1. Flatness

Before installation, you need to check the flatness of the on-site cabinets and cabinets, check whether the required installation surface and the size of the site are free of errors. If errors occur, you need to re-process, trim or adjust the cabinet.

2. Distance

When installing the Compound Quartz Stone, it is necessary to keep the distance between the countertop and the wall surface. The general gap is 3-5mm. The main purpose of retaining this gap is to prevent the expansion of the back surface and the cabinet by thermal expansion and contraction. After the installation is completed, you need to glue on the gap.

3. Flatness

If it is necessary to install a device such as a sink, firstly, some Customer Quartz Stone and the water on the countertop should be partially trimmed and tapped to check whether it is suspended. For some tiny suspended objects, we can add some at the bottom of the stone. Glass glue is used for filling. For some serious unevenness, it is necessary to stop the construction and adjust the cabinet to a flat state.

4. The gap

For some L-shaped countertops or some extra-long countertops, some strong retaining clips can be used to clamp the countertop pressing gaps if necessary and must be cleaned for the gaps.

5. Water retaining strip

Evenly apply some coloring glue on the bottom of the water barrier of the cabinet to stick the water strip. Do not use a connecting gel such as marble glue to prevent adhesion after bonding. Too tight to cause cracking or breakage of the countertop.